6 Returning to Factory Setting
To return all the contents already made in the printer configuration setting mode or system
maintenance mode to the factory setting, proceed as follows:
First turn OFF the power switch, then press and hold the PAUSE, FEED and STOP keys
simultaneously and at the same time turn ON the power switch, and continue holding down
those keys.
S Mainte
A 'Pi' sound is heard. Continue
holding down those keys
Factory setting
Printer configuration setting mode
Item
Printing method
Operation after
printing
Media sensor
Print density
Printing speed
Feed speed
Back-feed speed
Print start position
Column offset
Media stop position
Command
overriding
Indication
Item
Transfer
Baud rate
NoAction
Data length
Edge
Native
Heat 10
Feed amount
Pspeed 6
Command code
Fspeed 7
Adjustable sensor
Bspeed 4
Voltage setting
V 0.00in
H 0.00in
S 0.00in
SetLckOF
35
Chapter 2 Printer Operation
6 Returning to Factory Setting
Turn ON the power switch while
holding down those keys
simultaneously
S/I Init
When a 'Pi' sound is heard again,
the operation is completed
System maintenance mode
Indication
9600bps
8 bits
NativeON
f Virtual
Cmnd STD
AJSensOF
PE *.**V