Appendixes
2 Specifications
2. Tear-off when printing
•
If set, the tear-off feature will start if no data is transmitted from the computer after printing.
If data is transmitted continuously from the computer, the tear-off function will be
suppressed. Tear-off is only performed for the final label of each batch processing. (The
tear-off is not performed until the specified number of print sheets is completed.)
•
Media is fed to the tear position
• When manual tearing is needed, tear the label at this time.
• Performes next label printing.
When next print data is transmitted form the computer, the printer feeds back media to the
previous print completed position and resumes printing.
Media position sensor
Print head
Platen
Peeling (manual tearing)
Tear-off will start if no data is
transmitted after printing.
Media are fed to the position
where manual tearing is
possible
Media are fed back to the
previous print completed
position and printing resumes
78