Citizen CLP-7202e User Manual page 30

Chapter 2 Printer Operation
3 Printer Configuration Setting Mode
List of Mode Items
Transfer
Printing method
DirectTM
PeelWait
AutoCut
Operation after
printing
TearBar
NoAction
Edge
Reflect
Media sensor
ContinuP
Heat 01
Print density
Heat 30
Pspeed 2
Printing speed
Pspeed 7
Fspeed 2
Feed speed
Fspeed 7
Bspeed 2
Back-feed speed
Bspeed 7
V-2.00in
Print start
position
V+2.00in
H 0.00in
Column offset
H+2.00in
S-2.00in
Media stop
position
S+2.00in
SetLckOF
Command
overriding
SetLckON
Note: When the printer is switched off and on, the initial values for these menu items selected by
the printer configuration setting mode will be retrieved from the flash memory.
Indication
Thermal transfer printing is performed
Direct thermal printing is performed
Selected when peeler (option) is used
Selected when auto-cutter (option) is used
Media is automatically advanced to the cut position after printing
No operation is performed after printing
Transparent type sensor is used to detect the media position with
media gaps or notches
Reflective type sensor is used to detect the media position with
black marks
Printing on continuous media is performed without detecting
media gaps
:
Print density is set
:
Printing speed is set
:
Feed speed is set
:
Back-feed speed is set
:
Print start position is set (relative value to default value is used)
:
Column offset (horizontal direction) is set
Media stop position is set (relative values to default values for
:
peeling, auto-cutter, tearing are used)
Printing mode settings are allowed with command
Printing mode settings are not allowed with command
Description
28