Table of Contents
Advertisement
OPERATION
B. If you have purchased the hydraulic fold option for the outside wings:
-Simply put the main wings down and then flip the outer wing over using the tractor hydraulics. Make sure to
stand clear of the outer wing when it is being lowered to avoid injury. Once the wing is lowered, move the lock
pins to their operating position as shown below (Figures Asm-R-0567 & Asm-R-0568).
Then install the two 5/8" bolts provided to firmly hold the wing in place. One at the front of the wing and one at
the back of the wing as shown below (Figures Asm-R-0568 & Asm-R-0567).
10.5 Transport Position
When you are going to flip the outer wing over for transport purposes:
-It is important that you put the pins into their proper storage locations as the outer wings rests on these pins
during transport
FX-530 06/21
Operation Section 4-31
© 2021 Alamo Group Inc.
Advertisement
Table of Contents
