ASSEMBLY
TRANSPORT POSITION
When you are going to flip the outer wing over for transport purposes:
-It is important that you put the pins into their proper storage locations as the outer wings rests on these pins
during transport.
CHAIN GUARDS
Insert the chain link into the first slot of the chain rail
and slide the galvanized rod through the link.
Continue along the chain rail until all links are
inserted.
Bend the last 2" (51mm) of the galvanized rod back
to keep the chains from falling through the slots.
For single chain configurations, insert the end link
into the slot. For double chain configurations, insert
the middle link into the slot.
FX-530 03/21
Assembly Section 3-7
© 2021 Alamo Group Inc.