Operating Position - Schulte FX-530 Operator's Manual

OPERATION

10.4 Operating Position

A. If you have not purchased the hydraulic fluid option for the outside wings:
-Simply put the main wings down and then flip the outer wing over using an approved lifting device. Make sure
to stand clear of the outer wing when it is being lowered to avoid injury.
Once the wing is lowered, move the lock pins to their operating position as shown below (Figures Asm-R-
0567 & Asm-R-0568).
Then install the two 5/8" bolts provided to firmly hold the wing in place. One at the front of the wing and one at
the back of the wing as shown below (Figures Asm-R-0569 & Asm-R-0570).
FX-530 06/21 Operation Section 4-30
© 2021 Alamo Group Inc.