Table of Contents
Advertisement
ASSEMBLY
B.If you have purchased the hydraulic fold option for the outside wings:
-Simply put the main wings down and then flip the outer wing over using the tractor hydraulics. Make sure to
stand clear of the outer wing when it is being lowered to avoid injury. Once the wing is lowered, move the lock
pins to their operating position as shown below (Figures Asm-R-0567 & Asm-R-0568).
Then install the two 5/8" bolts provided to firmly hold the wing in place. One at the front of the wing and one at
the back of the wing as shown below (Figures Asm-R-0568 & Asm-R-0567).
C.If your FX-530 is shipped with the hitch flipped up as shown below, please follow the following steps
outlined for assembly.
FX-530 03/21
Assembly Section 3-4
© 2021 Alamo Group Inc.
Advertisement
Table of Contents
