Table of Contents
Advertisement
______________________
Mower ID#
Date:___________________________________
Make:__________________________________
Shift:___________________________________
Before conducting the inspection, make sure the tractor engine is off, all rotation
has stopped and the tractor is in park with the parking brake engaged. Make sure
the mower is resting on the ground or securely blocked up and all hydraulic
pressure has been relieved.
The Operator's Manual is in the canister on the mower
All safety decals are in place and legible
The tongue/hitch connection bolts & pins are tight
There are no cracks in tongue or hitch
The tow chain is secured to the tractor & mower
The hydraulic cylinders pins are tight
There are no leaking or damaged hoses
The mower deck is clear of cut grass and debris
Chain guards/deflectors are in place & in good condition
Driveline/gearbox shields are in good condition
Driveline clutches are in good condition; not frozen/seized
Driveline telescoping members & U-joints are lubricated
Driveline yokes are securely attached to PTO & mower
Gearbox mounting bolts are tight
Gearbox oil is at the proper level
Blade carrier retaining nut is tight
Blades are not chipped, cracked or bent
Blade bolts are tight
Wheel lug nuts are tight
Transport locks are in good condition
Proper hourly greasing as per Operator's Manual
Operator's Signature:___________________________________________________________________
DO NOT OPERATE an UNSAFE TRACTOR or MOWER
FX-530 06/21
© 2021 Alamo Group Inc.
OPERATION
Rotary Mower PRE-OPERATION Inspection
Item
Operation Section 4-27
IMPORTANT:
Scan this
QR Code for an electronic
copy of this inspection
sheet.
Condition at Start
of Shift
Specific Comments if
not O.K.
Advertisement
Table of Contents
