Grandstream Networks GXP2000EXT Manual page 18

http://arttel.ru
3. C
ALL
When returning a call, the phone will use the same SIP account as the call was made to. Thus, when
returning a call made to the third SIP account, the phone will use the third SIP account return the
call.
i. Hand-free option
ii. Hand-set option
4. U
SING
When using the call history, the phone will use the same SIP account as was used for the last
call/call attempt. Thus, when returning a call made to the third SIP account, the phone will use the
third SIP account return the call.
x
x
x
x
x
5. U
SING
Each entry in the phonebook can be attached to an individual SIP account. The phone will use that
SIP account to make the phone call.
x
x
x
x
6. P
AGING
The paging/intercom function can only be used if the SERVER/PBX supports this feature and both
the phones and PBX are correctly configured.
x
x
x
x
x
NOTE: Dial-tone and dialed number display occurs after the handset is off-hook and the line key is selected.
The phone waits 4 seconds (by default; No key Entry Timeout) before sending and initiating the call. Press
the "SEND" or "#" button to override the 4 second delay.
Speed Dial
The Multi Purpose Key buttons, located on the right-hand-side of the phone, can be configured for speed
dial. Press the speed dial button to automatically call the assigned extension.
Grandstream Networks, Inc.
R : To call the last phone number that called your phone.
ETURN
1. Press the CALL RETURN soft-key
1. Take the Handset off-hook
2. Press the CALL RETURN soft-key
:
THE CALL HISTORY
Press the MENU button to bring up the Main Menu.
Select Call History and then "Received Calls", "Missed Calls" or "Dialed Calls" depending on
your needs
Select phone number using the arrow keys
Press OK to select
Press OK again to dial.
:
THE PHONEBOOK
Go to the phonebook by:
i. Pressing the phonebook button (bottom, left-hand side of phone), or
ii. Pressing the DOWN arrow key, or
iii. Pressing the menu button and
Selecting "Phone book" and
Press MENU
Select the phone number by using the arrow keys
Press OK so select
Press OK again to dial.
/I :
NTERCOM
Take the Handset/SPEAKER/Headset off-hook,
Select the LINE key associated with account
Press OK key to display LCD: LINEx: PAGE USING.
Dial the phone number you want to Page/Intercom
Press SEND key.
To call a phone
Calling a phone in
GXP User Manual
Firmware 1.2.5.3
number in the phone's
from the phone's
Page 18 of 44
Last Updated: 03/2011
history
phonebook.