Power On/Of - NTT docomo DM-01G Instruction Manual

Power On/Of

Power On
Press and hold the power key for
a
over two seconds
• The lock screen is displayed.
Note
• A red dummy card is inserted into docomo
mini UIM card tray when you purchase this
terminal. Remove the dummy card before
powering on. You cannot power on with
the dummy card inserted.
Power Of
Press and hold the power key for
a
over two seconds
"Power of"
b
"OK"
c
Turning on Backlight
To prevent unintended operations and to save
power, the backlight turns of after a set period
and the screen is locked after then.
Press the power key
a
• Backlight lights on and the lock screen is
displayed.
Note
• When backlight blacked of, if you cover
proximity sensor, backlight blacks out
automatically even when you press power
key.
• When backlight is lit up, press power key
to black out the backlight and lock the
screen. Remove check mark on "Power
button instantly locks" (P208) to disable
the power key to lock the screen but only
black out the screen.
• Set screen time-out duration and time
duration till screen locked. For detailed
information, refer to "Screen timeout" in
"Display" (P205) and "Lock timer" in
"Lock screen" (P208).
Conirmation and Settings before Using
43