Docomo Mini Uim Card - NTT docomo DM-01G Instruction Manual

Infrared port part (IrRC)
p
• When QRemote (P51) is in use. Data
transfer is not available via infrared ray.
Sub microphone
q
• When speaker phone is in use.
1Seg antenna
r
docomo mini UIM card tray inject hole
s
docomo mini UIM card tray
t
Earphone/microphone jack
u
Mouthpiece (microphone)
v
microUSB connection terminal
w
• You can use a SlimPort supported cable
purchased in stores.
Speaker
x
Note
• Do not put stickers on any sensor area.
Conirmation and Settings before Using
36

docomo mini UIM card

docomo mini UIM card is an IC card that stores
information such as your telephone number.
• Functions such as calling or packet
communication are not available without a
docomo mini UIM card inserted. Make sure to
power of this terminal or remove docomo mini
UIM card from AC adapter during charging
before inserting or removing docomo mini UIM
card.
• This terminal uses only docomo mini UIM
card. Bring your UIM/FOMA card to a docomo
Shop to exchange it.
• For details about docomo mini UIM card, refer
to the instruction manual for docomo mini
UIM card.
• To insert/remove docomo mini UIM card, you
need a UIM opener (sample).
Note
• A red dummy card is inserted into docomo
mini UIM card tray when you purchase this
terminal. Remove the dummy card before
inserting docomo mini UIM card. You
cannot power on or charge this terminal
with the dummy card inserted.