Handling And Care - NTT docomo DM-01G Instruction Manual

Handling and Care

General Usage Guidelines
■ Do not get it wet.
This terminal, adapter and docomo mini UIM
card are not waterproof. Do not use them in
places with high humidity such as a bath or
where rain may get it wet. If you carry this
terminal close to your body, moisture from
sweat may corrode the internal parts causing
a malfunction. Note that malfunctions
deemed to be caused by water are not
covered by the warranty or impossible to
repair. Since these malfunctions are not
under warranty, even when repair is possible,
it will be done at the user's expense.
■ Clean this terminal with a dry, soft cloth
(lens cleaning cloth), etc.
• Rubbing it roughly with a dry cloth may
scratch the display.
• Drops of water or dirt left on the display
may cause stains.
• If this terminal is wiped with alcohol, paint
thinner, benzine or detergent, the printing
may disappear or color may fade.
■ Keep the connector contacts clean with a
dry cotton swab.
Clean the connector contacts with a dry
cotton swab to prevent contacts from
getting dirty which can result in intermittent
connections.
Be careful when cleaning the connector
contacts.
■ Do not place the terminal near air conditioner
outlets.
Condensation may form due to rapid changes
in temperature, and this may corrode internal
parts and cause malfunction.
■ Do not place excessive force on this terminal,
etc.
If this terminal is inserted to a full bag, or
placed in a pocket and sat on, the display,
its internal PCBs may be damaged or
malfunction.
Also, if an external connection device is
connected to a microUSB connection terminal
or earphone/microphone jack, damage on
connector or malfunction may result.
■ Do not rub or scratch the display with metal.
The display may get scratched and it may
cause malfunction or damage.
■ Read the individual manual attached to the
Options.
Contents/Precautions
25