Important Information - Bender COMTRAXX CP9 Series Manual

Customised alarm indicator and operator panel for medical locations and other areas
Hide thumbs Also See for COMTRAXX CP9 Series:
Table of Contents

Advertisement

4

Important information

Viruses are able to spy on data, spread themselves or destroy data in your network. Viruses are
easily spread since they transfer from one network to the other e.g. by the joint use of USB devic-
es. Viruses are constantly being written or modified; therefore, it is essential that the firewall and
antivirus software in your LAN network is always up to date. Contact your IT administrators in this
regard.
i
No antivirus software is installed on this CP9xx-x alarm indicator and operator panel.
The system has been delivered free of software viruses.
This system is running on an embedded Linux (Yocto) operating system. The operating system is
especially adapted to this hardware and software. Many interfaces are not implemented.
i
The embedded Linux (Yocto) operating system should preferably be operated in a separate
network. If it is integrated into existing networks, it should be integrated into the network envi-
ronment as a subnet with its own secure router.
i
Contact your IT administrator before connecting this panel to your network or before connect-
ing any USB device (e.g. a USB stick) to it.
Before connecting any external USB device (e.g. USB sticks with music files) run an antivirus soft-
ware on this device to eliminate the risk of virus infection.
i
Failure to observe these notes and recommendations might cause loss of data, system mal-
functions and device failure as well as failure of all connected equipment.
Read the "COMTRAXX® CP9xx - Control Panel" (D00349) manual for the operation of the CP9xx
and CP9xx-x alarm indicator and operator panels.
i
For further information, refer to:
Web user interface for Bender Condition Monitors COM465IP, COM465DP and CP907-I as well
as the "COMTRAXX®" (D00135) manuals.
i
The I/O control unit might be external and is always individually equipped. The actual design is
shown in the individual, project-related circuit diagram.
i
Do not disconnect the system from the power supply during shutdown or start-up. This might
result in an undefined status of the computer system and the system might fail.
COMTRAXX® CP9xx-x – Control Panel
CP9xx-x_D00406_00_M_XXEN/04.2020
31

Advertisement

Table of Contents
loading

Table of Contents