Configuring Wan Ip - ZyXEL Communications Wireless Router P-334 User Manual

Table 18 PPTP Encapsulation
LABEL
Retype to Confirm
Nailed-up Connection
Idle Timeout
PPTP Configuration
My IP Address
My IP Subnet Mask
Server IP Address
Connection ID/Name
Apply
Reset

6.5 Configuring WAN IP

To change your Prestige's WAN IP settings, click WAN, then the WAN IP tab. This screen
varies according to the type of encapsulation you select.
If your ISP did not assign you a fixed IP address, click Get automatically from ISP
(Default);otherwise click Use fixed IP Address and enter the IP address in the field provided.
Chapter 6 WAN Screens
DESCRIPTION
Type your password again to make sure that you have entered is correctly.
Select Nailed-Up Connection if you do not want the connection to time out.
This value specifies the time in seconds that elapses before the Prestige
automatically disconnects from the PPTP server.
Type the (static) IP address assigned to you by your ISP.
Your Prestige will automatically calculate the subnet mask based on the IP
address that you assign. Unless you are implementing subnetting, use the
subnet mask computed by the Prestige.
Type the IP address of the PPTP server.
Type your identification name for the PPTP server.
Click Apply to save your changes back to the Prestige.
Click Reset to begin configuring this screen afresh.
Prestige 334 User's Guide
78