Figure 171 Menu 24.10 System Maintenance: Time And Date Setting; Table 101 Time And Date Setting Fields - ZyXEL Communications Wireless Router P-334 User Manual

Prestige 334 User's Guide

Figure 171 Menu 24.10 System Maintenance: Time and Date Setting

Time Protocol= NTP (RFC-1305)
Time Server Address= time-b.nist.gov
Current Time:
New Time (hh:mm:ss):
Current Date:
New Date (yyyy-mm-dd):
Time Zone= GMT
Daylight Saving= No
Start Date (mm-dd):
End Date (mm-dd):
The following table describes the fields in this screen.

Table 101 Time and Date Setting Fields

FIELD
Time Protocol
Time Server
Address
Current Time
New Time
Current Date
New Date
Time Zone
Daylight Saving
Start Date
303
Menu 24.10 - System Maintenance - Time and Date Setting
Press ENTER to Confirm or ESC to Cancel:
DESCRIPTION
Enter the time service protocol that your timeserver sends when you turn on the
Prestige. Not all timeservers support all protocols, so you may have to check with
your ISP/network administrator or use trial and error to find a protocol that works.
The main differences between them are the format.
Daytime (RFC 867) format is day/month/year/time zone of the server.
Time (RFC-868) format displays a 4-byte integer giving the total number of
seconds since 1970/1/1 at 0:0:0.
NTP (RFC-1305) the default, is similar to Time (RFC-868).
None enter the time manually.
Enter the IP address or domain name of your timeserver. Check with your ISP/
network administrator if you are unsure of this information. The default is
tick.stdtime.gov.tw
This field displays an updated time only when you reenter this menu.
Enter the new time in hour, minute and second format.
This field displays an updated date only when you reenter this menu.
Enter the new date in year, month and day format.
Press [SPACE BAR] and then [ENTER] to set the time difference between your
time zone and Greenwich Mean Time (GMT).
Daylight Saving Time is a period from late spring to early fall when many countries
set their clocks ahead of normal local time by one hour to give more daylight time in
the evenings. If you use daylight savings time, then choose Yes.
Enter the month and day that your daylight-savings time starts on if you selected
Yes in the Daylight Saving field.
08 : 07 : 14
08 : 06 : 48
2003 - 12 - 24
2003 - 12 - 24
01 - 01
01 - 01
Chapter 31 System Maintenance