Firewall Versus Filters; Applying A Filter; Applying Lan Filters; Figure 144 Protocol And Device Filter Sets - ZyXEL Communications Wireless Router P-334 User Manual

Figure 144 Protocol and Device Filter Sets

27.5 Firewall Versus Filters

Firewall configuration is discussed in the firewall chapters of this manual. Further
comparisons are also made between filtering, NAT and the firewall.

27.6 Applying a Filter

This section shows you where to apply the filter(s) after you design it (them). The Prestige
already has filters to prevent NetBIOS traffic from triggering calls, and block incoming telnet,
FTP and HTTP connections

27.6.1 Applying LAN Filters

LAN traffic filter sets may be useful to block certain packets, reduce traffic and prevent
security breaches. Go to menu 3.1 (shown next) and enter the number(s) of the filter set(s) that
you want to apply as appropriate. You can choose up to four filter sets (from twelve) by
entering their numbers separated by commas, e.g., 3, 4, 6, 11. Input filter sets filter incoming
traffic to the Prestige and output filter sets filter outgoing traffic from the Prestige. For PPPoE
or PPTP encapsulation, you have the additional option of specifying remote node call filter
sets.
Chapter 27 Filter Configuration
.
Note:
If you do not activate the firewall, it is advisable to apply filters
Prestige 334 User's Guide
268