Figure 30 SUA/NAT Setup
The following table describes the labels in this screen.
Table 24 SUA/NAT Setup
LABEL
Default Server
#
Active
Name
Start Port
End Port
Server IP
Address
Apply
Reset
Chapter 7 Network Address Translation (NAT) Screens
DESCRIPTION
In addition to the servers for specified services, NAT supports a default server. A
default server receives packets from ports that are not specified in this screen.
If you do not assign a Default Server IP Address, the Prestige discards all packets
received for ports that are not specified in this screen or remote management.
Number of an individual SUA server entry.
Select this check box to enable the SUA server entry. Clear this checkbox to
disallow forwarding of these ports to an inside server without having to delete the
entry.
Enter a name to identify this port-forwarding rule.
Enter a port number here. To forward only one port, enter it again in the End Port
field. To specify a range of ports, enter the last port to be forwarded in the End Port
field.
Enter the inside IP address of the server here.
Click Apply to save your changes back to the Prestige.
Click Reset to begin configuring this screen afresh.
Prestige 334 User's Guide
94