System Statistics; Dhcp Table Screen; Figure 75 Maintenance System Statistics; Table 60 Maintenance System Statistics - ZyXEL Communications Wireless Router P-334 User Manual

Broadband router with firewall
Hide thumbs Also See for Wireless Router P-334:
Table of Contents

Advertisement

17.2.1 System Statistics

Read-only information here includes port status and packet specific statistics. Also provided
are "system up time" and "poll interval(s)". The Poll Interval(s) field is configurable.

Figure 75 Maintenance System Statistics

The following table describes the labels in this screen.

Table 60 Maintenance System Statistics

LABEL
Port
Status
TxPkts
RxPkts
Collisions
Tx B/s
Rx B/s
Up Time
System Up Time
Poll Interval(s)
Set Interval
Stop

17.3 DHCP Table Screen

DHCP (Dynamic Host Configuration Protocol, RFC 2131 and RFC 2132) allows individual
clients to obtain TCP/IP configuration at start-up from a server. You can configure the Prestige
as a DHCP server or disable it. When configured as a server, the Prestige provides the TCP/IP
configuration for the clients. If set to None, DHCP service will be disabled and you must have
another DHCP server on your LAN, or else the computer must be manually configured.
Chapter 17 Maintenance
DESCRIPTION
This is the WAN, LAN port.
This displays the port speed and duplex setting if you're using Ethernet
encapsulation and down (line is down), idle (line (ppp) idle), dial (starting to trigger
a call) and drop (dropping a call) if you're using PPPoE encapsulation.
This is the number of transmitted packets on this port.
This is the number of received packets on this port.
This is the number of collisions on this port.
This displays the transmission speed in bytes per second on this port.
This displays the reception speed in bytes per second on this port.
This is the total amount of time the line has been up.
This is the total time the Prestige has been on.
Enter the time interval for refreshing statistics in this field.
Click this button to apply the new poll interval you entered in the Poll Interval(s)
field.
Click Stop to stop refreshing statistics, click Stop.
Prestige 334 User's Guide
192

Advertisement

Table of Contents
loading

This manual is also suitable for:

Prestige 334

Table of Contents