Pppoe Encapsulation; Figure 19 Ethernet Encapsulation; Table 16 Ethernet Encapsulation - ZyXEL Communications Wireless Router P-334 User Manual

Figure 19 Ethernet Encapsulation

The following table describes the labels in this screen.

Table 16 Ethernet Encapsulation

LABEL
Encapsulation
Service Type
User Name
Password
Retype to Confirm
Login Server IP
Address
Login Server
Relogin Every(min) This field only applies when you select Telia Login in the Service Type field. The
Apply
Reset

6.4.2 PPPoE Encapsulation

The Prestige supports PPPoE (Point-to-Point Protocol over Ethernet). PPPoE is an IETF Draft
standard (RFC 2516) specifying how a personal computer (PC) interacts with a broadband
modem (DSL, cable, wireless, etc.) connection. The PPP over Ethernet option is for a dial-
up connection using PPPoE.
Chapter 6 WAN Screens
DESCRIPTION
You must choose the Ethernet option when the WAN port is used as a regular
Ethernet.
Choose from Standard, Telstra (RoadRunner Telstra authentication method),
RR-Manager (Roadrunner Manager authentication method), RR-Toshiba
(Roadrunner Toshiba authentication method) or Telia Login.
The following fields do not appear with the Standard service type.
Type the user name given to you by your ISP.
Type the password associated with the user name above.
Type the password again to make sure that you have entered it correctly.
Type the authentication server IP address here if your ISP gave you one.
This field only applies when you select Telia Login in the Service Type field.
Type the domain name of the Telia login server, for example "login1.telia.com".
Telia server logs the Prestige out if the Prestige does not log in periodically. Type
the number of minutes from 1 to 59 (30 default) for the Prestige to wait between
logins.
Click Apply to save your changes back to the Prestige.
Click Reset to begin configuring this screen afresh.
Prestige 334 User's Guide
74