System Information And Diagnosis; System Status; Figure 149 Menu 24 System Maintenance - ZyXEL Communications Wireless Router P-334 User Manual

This chapter covers the information and diagnostic tools in SMT menus 24.1 to 24.4.
These tools include updates on system status, port status, log and trace capabilities and
upgrades for the system software. This chapter describes how to use these tools in detail.
Type 24 in the main menu to open Menu 24 – System Maintenance, as shown in the
following figure.

Figure 149 Menu 24 System Maintenance

29.1 System Status

The first selection, System Status gives you information on the status and statistics of the
ports, as shown next
Prestige. Specifically, it gives you information on your ADSL telephone line status, number of
packets sent and received.
To get to System Status, type 24 to go to Menu 24 — System Maintenance. From this menu,
type 1. System Status. There are two commands in Menu 24.1 — System Maintenance —
Status. Entering 1 resets the counters; [ESC] takes you back to the previous screen.
The following table describes the fields present in Menu 24.1 — System Maintenance —
Status which are read-only and meant for diagnostic purposes.
Chapter 29 System Information and Diagnosis
System Information and
Menu 24 - System Maintenance
1. System Status
2. System Information and Console Port Speed
3. Log and Trace
4. Diagnostic
5. Backup Configuration
6. Restore Configuration
7. Upload Firmware
8. Command Interpreter Mode
9. Call Control
10. Time and Date Setting
11. Remote Management Setup
Figure 150 . System Status is a tool that can be used to monitor your
C
H A P T E R
Diagnosis
Prestige 334 User's Guide
2 9
274