ZyXEL Communications Wireless Router P-334 User Manual page 43

Table 1 Screens Summary
LINK
REMOTE MGMT TELNET
VPN
UPnP
TMSS
LOGS
MAINTENANCE
LOGOUT
Chapter 2 Introducing the Web Configurator
TAB FUNCTION
Use this screen to configure through which interface(s) and from
which IP address(es) users can use Telnet to manage the
Prestige.
FTP Use this screen to configure through which interface(s) and from
which IP address(es) users can use FTP to access the Prestige.
WWW Use this screen to configure through which interface(s) and from
which IP address(es) users can use HTTP to manage the
Prestige.
SNMP Use this screen to configure your Prestige's settings for Simple
Network Management Protocol management.
DNS Use this screen to configure through which interface(s) and from
which IP address(es) users can send DNS queries to the
Prestige.
Security Use this screen to change your anti-probing settings.
Summary Use this screen to view the rule summary.
Rule Setup Use this screen to configure VPN connections.
SA Monitor Use this screen to display and manage active VPN connections.
Global Setting Use this screen to allow NetBIOS packets through the VPN
connections.
UPnP Use this screen to enable UPnP on the Prestige.
Service Settings Use this screen to decide which computers in the network you
can apply TMSS.
Antivirus This screen allows you to check the computers in your network
Protection for Trend Micro Internet Security.
Parental This screen allows a parent (LAN administrator) to control a LAN
Controls user's Internet access privileges by blocking specified website
categories.
View Log Use this screen to view the logs for the categories that you
selected.
Log Settings Use this screen to change your Prestige's log settings.
Status This screen contains administrative and system-related
information.
DHCP Table This screen displays DHCP (Dynamic Host Configuration
Protocol) related information and is READ-ONLY.
Any IP Use this screen to allow a computer to access the Internet
without changing the network settings of the computer, when the
IP addresses of the computer and the Prestige are not in the
same subnet.
F/W Upload Use this screen to upload firmware to your Prestige.
Configuration Use this screen to backup and restore the configuration or reset
the factory defaults to your Prestige.
Restart This screen allows you to reboot the Prestige without turning the
power off.
Click this label to exit the web configurator.
Prestige 334 User's Guide
42