Figure 67 Setup: Manual
The following table describes the labels in this screen.
Table 53 Rule Setup: Manual
LABEL
Active
IPSec Keying Mode
Protocol Number
Local Address
Local Port Start
Chapter 15 VPN Screens
DESCRIPTION
Select this check box to activate this VPN policy.
Select IKE or Manual from the drop-down list box. Manual is a useful option
for troubleshooting if you have problems using IKE key management.
Enter 1 for ICMP, 6 for TCP, 17 for UDP, etc. 0 is the default and signifies any
protocol.
The Local IP address must be static and correspond to the remote IPSec
router's configured remote IP addresses.
Two active SAs can have the same local or remote IP address, but not both.
You can configure multiple SAs between the same local and remote IP
addresses, as long as only one is active at any time.
"0" is the default and signifies any port. Type a port number from 0 to 65535.
Some of the most common IP ports are: 21, FTP; 53, DNS; 23, Telnet; 80,
HTTP; 25, SMTP; 110, POP3.
Prestige 334 User's Guide
176