ZyXEL Communications Wireless Router P-334 User Manual page 210

Prestige 334 User's Guide
Table 66 Menu 1.1 Configure Dynamic DNS
FIELD
Offline
Edit Update IP Address:
You can select Yes in either the Use Server Detected IP field (recommended) or the User Specified
IP Addr field, but not both.
With the Use Server Detected IP and User Specified IP Addr fields both set to No, the DDNS server
automatically updates the IP address of the host name(s) with the Prestige's WAN IP address.
DDNS does not work with a private IP address. When both fields are set to No, the Prestige must have
a public WAN IP address in order for DDNS to work.
Use Server
Detected IP
User Specified IP
Address
IP Address
When you have completed this menu, press [ENTER] at the prompt "Press ENTER to Confirm..." to
save your configuration, or press [ESC] at any time to cancel.
209
DESCRIPTION
This field is only available when CustomDNS is selected in the DDNS Type field.
Press [SPACE BAR] and then [ENTER] to select Yes. When Yes is selected,
/www.dyndns.org/
traffic is redirected to a URL that you have previously specified
(see www.dyndns.org for details).
Press [SPACE BAR] to select Yes and then press [ENTER] to have the DDNS
server automatically update the IP address of the host name(s) with the public IP
address that the Prestige uses or is behind.
You can set this field to Yes whether the IP address is public or private, static or
dynamic.
Press [SPACE BAR] to select Yes and then press [ENTER] to update the IP
address of the host name(s) to the IP address specified below.
Only select Yes if the Prestige uses or is behind a static public IP address.
Enter the static public IP address if you select Yes in the User Specified IP Addr
field.
Note: The IP address updates when you reconfigure menu 1 or
perform DHCP client renewal
Chapter 19 Menu 1 General Setup
http:/