Selecting Patterns From A Pattern Disk (Optional) - Yamaha Electone EL-900 Owner's Manual

13) Selecting Rhythms From a Pattern Disk (Optional)
You can also load the rhythms from optional Pattern Disks to the User rhythms
in the Rhythm Menu.
To do this:
1
Press the PATTERN button in the DISPLAY SELECT section.
2
Select the DISK page with the Page buttons.
The message ﾒInsert Pattern Disk!!ﾓ appears and prompts you the
operation.
3
Insert the Pattern Disk into the disk slot under the Music Disk
Recorder.
The pattern number and name from the Pattern Disk appears.
PATTERN DISK Page
4
Using any of the Data Control button pairs, select the pattern you
wish to load.
5
Start the rhythm to check the pattern to be called up. Select other
patterns (as you did in step #4 above) and check those patterns as
well.
6
If you want to save the current pattern to a User Rhythm space, select
the previous page, ﾒSAVEﾓ with the Page buttons.
7
Press the corresponding Data Control buttons to designate both the
User Rhythm number and its variation type (A, B, C, or D).
Press one of the four Data Control buttons below [Save] on the display
to save the pattern, or one of the four buttons below [Cancel] to abort
the operation and return to the previous display.
When the pattern has been saved, a ﾒcompleted!!ﾓ message appears.
Pressing these buttons steps through the
pattern numbers; the name of each pattern
appears on the display as well. Refer to
the list included with your Pattern Disk
for pattern numbers and names.
9
143