Yamaha Electone EL-900 Owner's Manual page 76

5
NOTE:
Though eight User Keyboard Percussion
setups can be created, they cannot be
memorized to Registration Memory. Only
on/off data and the Keyboard Percussion
Menu are memorized to Registration
Memory.
NOTE:
Two User Keyboard Percussions currently
selected by LOWER/1 and PEDAL/2 are
playable if both buttons are on.
NOTE:
When creating a User Rhythm pattern, the
instrument assignments are different from
the ones described here. (See page 128
for Rhythm Pattern Program instrument
assignments.)
76
4
To assign an instrument to a particular key or pedal:
simultaneously hold down the Data Control button corresponding
to the desired instrument and press the key (or pedal) to which the
instrument is to be assigned.
The newly assigned instrument name and key are shown near the
top of the display.
Continue the operation above to build up your own User Keyboard
Percussion set.
5
To erase an instrument/key assignment, use the Clear function. Clear
can be used in two ways: to erase one instrument or all instruments.
To erase one instrument:
Simultaneously hold down the Data Control button corresponding
to CLEAR and press the key (or pedal) corresponding to the
instrument you wish to erase. (A short ﾒbeepﾓ sound indicates that
the instrument has been erased.)
To erase all instruments:
1. Press, then release the Data Control button corresponding to
CLEAR. The following display appears, prompting confirmation
of the operation.
2. Press any of the Data Control buttons below [Clear] in the display
to erase all data. When [Clear] is selected, a ﾒCompletedﾓ message
momentarily appears on the display. Press any of the Data Control
buttons below [Cancel] in the display to abort the operation.
Upper Keyboard
Lower Keyboard
or
Pedalboard