Registration Shift - Yamaha Electone EL-900 Owner's Manual

VOICE EFFECT
DISPLAY SET
FOOT REGIST.
SW. SHIFT
6
VOICE
EDIT PATTERN SEQUENCE
U. FLUTE L. FLUTE
VOICE VOICE
DISPLAY SELECT
82

4 Registration Shift

The Registration Shift function allows you to change registrations, all
the settings you make on the panel and LCD, without taking your hands
from the keyboards. By using the Right Footswitch on the Expression
Pedal, you can ﾒjumpﾓ to a specified registration or step through the
panel registrations in sequence, either in numeric order or in any order
you specify. Registration Shift has three modes: Shift, Jump and User.
To select the Registration Shift functions:
Press the REGIST. SHIFT button in the DISPLAY SELECT section.
REGIST SHIFT Page
A. B. C.
M. O. C.
EXP.
PITCH/MIDI
RHYTHM
PROGRAM
TREMOLO
(FAST)
1 2 3
1 OFF
Turns off the Registration Shift assignment.
2 SHIFT
Selects the Shift mode. In the Shift mode, each press of the Right
Footswitch selects the Registration Memory presets in their numerical
order. After the last preset is reached, the function ﾒwraps aroundﾓ to
select the first preset again. The numbered buttons light up as they are
selected.
To set the Shift mode function:
Press any of the Data Control buttons below SHIFT in the
Registration Shift page..
3 JUMP
Selects the Jump mode. In the Jump mode, each press of the Right
Footswitch selects a specified panel registration.
To set the Jump mode function:
1. Press any of the Data Control buttons below JUMP in the
Registration Shift page.
The Jump ﾒdestinationﾓ appears at the right side of the LCD.
2. Enter the desired registration number using the Data Control
buttons to select the registration number.
4