Selecting From Voice Condition; Page 1]; Touch Tone - Yamaha Electone EL-900 Owner's Manual

1 Selecting from Voice Condition

Pages
To call up the Voice Condition page:
Choose a voice on the panel, then press that voiceﾕs panel button again (or
again press the Data Control button corresponding to the selected voice).
LEAD VOICE 1
VIOLIN
OBOE
The Voice Condition display pages of the various voice sections have slight
differences in their functions.
Each function in the Voice Condition page is independently applied to each
voice section.
Voice Condition [PAGE 1]
1 1 2
-1 -2
1

1 TOUCH TONE

The Touch Tone function gives you expressive control over the volume and
timbre of a voice. Two types of keyboard touch affect this function: Initial
Touch and After Touch.
All voices are provided with this expressive function, making it possible to
perfectly reproduce the subtle dynamic and tonal changes of actual
instruments. For example, piano voices sound much brighter when you hit
the keys strongly, especially in the attack portion of the sound ﾑ exactly as if
you were playing an acoustic piano.
1
INITIAL Touch
-1
Controls volume and timbre according to the velocity at which you
strike the keys. The harder you strike the keys, the greater the volume
and the brighter the timbre will become.
1
AFTER Touch
-2
Controls volume and timbre according to the pressure you apply to
the keys after playing them. The harder, you press down on the keys,
the greater the volume and the brighter the timbre will become.
BRILLIANCE VOLUME
BRILLIANT MAX
FLUTE
1
TRUM- TO
PET LOWER
MELLOW MIN
3 4 5
Upper/Lower
Pedal
6
NOTE:
Generally, After Touch has no effect on
percussive voices (such as Piano,
Harpsichord or Vibraphone) or percussion
sounds.
NOTE:
Minimum setting produces no effect at all.
4
45