Yamaha Electone EL-900 Owner's Manual page 28

NOTE:
The Lead and Pedal Voices sound one note
2
at a time; when you simultaneously press
two or more keys, only the highest note
will sound.
VOICE
DISPLAY
FOOT
SW.
VOICE
EDIT
U. FLUTE
VOICE
DISPLAY SELECT
When the TO LOWER button is turned
on, the Lead voices and Pedal voices
cannot be played on the Upper keyboard
and Pedalboard, respectively.
NOTE:
ﾒTo Lowerﾓ function is not available in the
Lead Voice 2 section.
COARSE
Turning the Electone off erases all panel settings you have made. When the Electone is turned on, Basic Registration 1 is
automatically selected.
If you have made panel settings you wish to keep, save them to Registration Memory (see page 80) before turning the Electone
off.
You can, however, restore the panel settings that were made before the Electone was last turned off. See page 86 for more
information.
28
5
6
EFFECT A. B. C.
SET M. O. C.
REGIST. EXP.
SHIFT PITCH/MIDI
RHYTHM
PROGRAM
PATTERN SEQUENCE
L. FLUTE TREMOLO
VOICE (FAST)
About TO LOWER - Playing Lead Voice 1 and Pedal Voice 1/
2 from the Lower keyboard:
The Electone has a special ﾒTo Lowerﾓ function that lets you assign Lead
(Lead Voice 1 only) or Bass voices to the Lower keyboard. Simply press
the TO LOWER button on the voice section you wish to assign, and that
voice will be playable from the Lower keyboard.
VIOLIN
OBOE
About Mute function:
VOLUME
The voices of the four voice sections of the Upper keyboard (two in the
MAX
Lower and Pedal) sound together in a layer, and the balance of the voices
Actual
volume
in the layer is determined by these VOLUME controls. You can easily
setting
mute the voice of a voice section by holding down the COARSE button
and pressing the panel volume control of the voice section you wish to
When muted
MIN
mute. Repeating the procedure restores the original volume setting.
Now select voices for the Lower keyboard and Pedalboard as you did
for the Upper keyboard above. Also set the volumes of the voices.
Adjust the volume balance between the Upper and Lower Voices with
the Balance Control provided on the Voice Display.
1. Return to the Voice Display by pressing the VOICE DISPLAY
button in the DISPLAY SELECT section.
2. Adjust the balance with the corresponding Data Control buttons.
LEAD VOICE 1
BRILLIANCE VOLUME
BRILLIANT MAX
FLUTE
1
TRUM- TO
PET LOWER
MELLOW MIN
Pressing this pair of Data
Control buttons at the same
time restores the balance to
the center position.
PEDAL VOICE 1
BRILLIANCE
BRILLIANT
CONTRA ELEC.
1
BASS BASS
ORGAN TUBA TO
BASS LOWER
MELLOW
VOLUME
MAX
MIN