Yamaha Electone EL-900 Owner's Manual page 85

2
CLEAR
-4
For erasing all current user Registration Shift Settings.
After selecting CLEAR, the following display appears:
Select [Clear] to clear all data. The message ﾒCompleted!!ﾓ
momentarily appears on the LCD and returns to the previous
display.
Select [Cancel] to abort the operation.
Registration numbers cannot be entered beyond the Registration
Shift functionﾕs capacity of 80. The following message momentarily
appears when the 80 spaces have been filled:
First delete unnecessary registrations, then perform the operation
again.
Resetting the Electone to the Factory Preset (Power On Reset)
All current settings including Registration Memories, User voices and
User rhythms can be deleted at once by using the Power On Reset function.
To reset the all settings:
1
Turn off the power.
2
While holding down the top left Data Control button, turn the
power back on.
Clear Cancel
Be careful when using this operation,
since it erases all your existing data.
Always save your important data to a
floppy disk using M.D.R. (page 87) in
advance.
POWER
6
85