Editing With Step Write - Yamaha Electone EL-900 Owner's Manual

9
132

7) Editing with Step Write

To enter sounds with Step Write:
1
Raise the rhythm volume, and turn off all the Upper and Lower
keyboard voices by setting each sectionﾕs volume to MIN.
2
Select the EDIT page with the Page buttons.
3
Select the percussion sound you wish to enter.
There are two ways to select percussion sounds in the Step Write mode:
[1] Press the key on the Upper or Lower keyboard that
corresponds to the sound. The instrument name automatically
appears at the top right of the LCD when the key is pressed. The
selected instrument is automatically assigned to an available empty
rhythm track.
[2] Use the leftmost Data Control buttons under the rhythm track
number to step through the available sixteen rhythm tracks. The
name of the instrument currently assigned to the selected track is
displayed at the top right of the LCD. (Since this method allows
you to select only from among the assigned instruments, use the
Change function described with the LCD below to change
instrument assignments.)
* This method is especially useful when editing an existing rhythm,
preset or user.
EDIT PageﾑStep Write
1 3
1 Rhythm Track
Selects from among the sixteen rhythm tracks and displays the
currently selected rhythm track number.
2 CHANGE
Replaces the instrument assigned to any given track with the others.
Rhythm Track Instrument Name
2