Using Preset And User Voices - Yamaha Electone EL-900 Owner's Manual

3 Using Preset and User Voices

To call up the Preset Voices and User Voices:
1
Press the Page buttons to select the MENU page.
MENU Page
2
Select Preset or User Flute Voices.
Eight factory-preset voices (four Jazz Organ and four Pop Organ
voices) are set to the upper row, and the eight User voices in the
bottom row are for selecting voices you created and stored with the
SAVE page.
PAGE
NOTE:
The User area described in this section has
no relation to that of the Voice Menu page.
NOTE:
When you use the Upper/Lower Flute
Voices and/or other voices at the same
time, only one of the voices can be
displayed at a time, even though all voices
may be operative and both of the Upper
and Lower Flute Voice LEDs are lit.
NOTE:
Remember that the UPPER and LOWER
FLUTE VOICE buttons are on/off
switches. In the process of turning on a
Flute Voice, then switching to another
function and returning to the Flute Voice,
you may unintentionally turn the Flute
Voice off. Check whether the Flute Voice
LEDs are on or off before you start to play.
3
43