Yamaha Electone EL-900 Owner's Manual page 139

Pressing the Data Control button corresponding to CHANGE VOICE
opens the following message on the display.
Select the voice you want to use by pressing the Data Control buttons
corresponding to .
The available voices are as follows:
Acc.Piano
Acc.EP (Electric Piano)
Acc.FolkGt (Acoustic Guitar)
Acc.JazzGt (Jazz Guitar)
Acc.Banjo
Acc.ElecGt (Electric Guitar)
Acc.MuteGt (Muted Guitar)
Acc.DistGt (Distortion Guitar)
Acc.Brass
Acc.Horn
Acc.Sax (Saxophone)
Acc.Clari (Clarinet)
Acc.JzOrg (Jazz Organ)
Acc.Accord (Accordion)
Acc.Woody
Acc.Metal
* Acc.: Accompaniment
4 Step Forward and Step Reverse Controls
Each press of the corresponding Data Control buttons advances or
reverses the rhythm clock by one step. The size of a single step is
determined by the Quantize value, set in the Beat/Quantize page.
5 ACCENT
Records the selected voice and determines its volume or Accent level.
4
Select a voice used for the rhythmic pattern.
5
(If necessary) Choose the BEAT/QUANTIZE page and select the
desired quantize value.
6
Returns to the Lower Rhythmic (ACC.) page and press the appropriate
Accent button to actually enter the notes.
7
Repeat the above #5 and #6 steps to complete your own rhythmic
pattern.
NOTE:
When the user rhythm contains the lower
rhythmic pattern data, the ACC. page is
always engaged with the Lower Rhythmic
function. If you want to use a preset
accompaniment for your rhythm, you need
to erase the lower rhythmic pattern data
using the Clear operation.
9
139