Rhythm Sequence Program - Yamaha Electone EL-57 Owner's Manual

2 Rhythm Sequence Program

With the Rhythm Sequence Program function, you can connect any
of the Electone's existing rhythms and the rhythms of your own
creation together to make complete rhythm compositions. You can
save four rhythm compositions to the Sequence buttons on the
panel for future recall.
1) Selecting a Sequence
Press the SEQUENCE button in the DISPLAY SELECT section.
The LEDs of the numbered Sequence buttons in the Rhythm
section on the panel will flash and the following display will
prompt you to select a sequence number.
MARCH
SEQ. SEQ.
1 2
USER 1
TANGO
SEQ. SEQ.
3 4
USER 5
Press one of the Sequence buttons to call up the Rhythm
Sequence display.
In this display, different rhythms (both Preset rhythms and User
rhythms that you created with the Rhythm Pattern Program)
can be entered in sequence along the pattern row in the middle
of the display. Entered patterns are shown in boxes, while the
numbers in the row above indicate the position.
Up to three-character code inside each box indicates the type
and number of the rhythm. The preset rhythms of the Electone
are indicated by a two-digit number (i.e., [01] or [02]). User
patterns are indicated by the "U" prefix as well as a letter suffix
representing the type-A,B,C,D, and F (Fill In). Examples of
these include [U1A] and [U3F]. The preset patterns also may
have a letter suffix: "I" indicates Intro, "F" indicates Fill In, and
"E" indicates Ending (i.e., [03I], [25E], and [56F]).
RHYTHM
WALTZ SWING BOUNCE SLOW
ROCK
USER 2 USER 3 USER 4 A
LATIN 1 LATIN 2 8 BEAT 16 BEAT
USER 6 USER 7 USER 8 C
VOLUME
MAX
1
B
2
D
MIN
NOTE:
Any rhythm currently playing will
automatically be stopped when you
call up the Rhythm Sequence Program
function. Also, use of the Music Disk
Recorder function automatically
cancels Rhythm Sequence operations.
VOICE EFFECT A. B. C.
DISPLAY SET M. O. C.
FOOT REGIST EXP.
SW. SHIFT PITCH/MIDI
RHYTHM
PROGRAM
VOICE
EDIT PATTERN SEQUENCE
TREMOLO
(FAST)
DISPLAY SELECT
8
111