Activating And Deactivating Additional Functions - Angelcare AC117 Owner's Manual

TEMPERATURE ALARM
• Alarm activates when the temperature reaches the maximum or minimum set temperature.
• Parent Unit will emit 3 consecutive beeps, every 5 seconds if the temperature reaches levels out of your
chosen range. The relevant icon will flash on the Parent Unit screen to alert you.
STEP 6 - ACTIVATING AND DEACTIVATING ADDITIONAL FUNCTIONS
6.1 - ACTIVATE OR DEACTIVATE TEMPERATURE INDICATOR ON NURSERY UNIT
With this option the Nursery Unit Temperature Indicator will light up in colour when the temperature goes above
or below your preferences. If the temperature goes above your set preferences and this option is activated, the
light on the Nursery Unit's will turn to red instead of the default white. If the temperature goes below the set
preferences, then the light will turn blue.
ON/OFF
Temperature
light
6.2 - OUT OF RANGE SETTINGS
Your monitor has an Out‑of‑Range alarm that advises you when your two units are not communicating. Out‑of‑Range
situations can be caused by distance or by physical interferences.
RANGE:
Open field (Open area without obstructions): up to 230 meters.
OUT-OF-RANGE ALARM
• Alarm activates when your two units are not communicating.
• The Parent Unit will emit a triple beep every 16 seconds.
• Out‑of‑Range Icon will flash on the screen.
IMPORTANT
If you turn the Nursery Unit OFF the Out‑of‑Range Alarm will sound. Turn the Nursery Unit ON again to
reactivate the link.
74
Red ‑ Room temperature is too hot
Blue ‑ Room temperature is too cold
White ‑ Room temperature is good