Step 5 - Activating And Deactivating Additional Functions - Angelcare AC1320 Owner's Manual

YOU ARE NOW READY TO USE YOUR MONITOR
The Angelcare ® monitor can be used with the pre-program factory settings
or you can also customise your settings to your preference.
DEFAULT SETTINGS
Sound Mode: ON
Speaker Volume: Level 3 (of 6)
Screen Saver Timer: ON
(after 3 minutes)
VOX: ON
VOX Level: Level 2 (of 4)
Key Tone: ON
Temperature Unit: Celsius
Temperature Alarm: OFF
LCD Brightness: Level 3 (of 5)

STEP 5 - ACTIVATING AND DEACTIVATING ADDITIONAL FUNCTIONS

5.1 - SOUND TRANSMISSION (VOX)
Your monitor is 'Sound Activated'. This means that it will transmit sounds only when it detects them.
It will detect even the softest levels of crying.
To save power, after 10 seconds, the sound transmission will stop if no sound is detected.
Once sound is detected transmission will automatically activate.
TO ADJUST THE SOUND SENSITIVITY (VOX):
Allows you to determine the sound level needed to trigger sound transmission
to the Parent Unit. This means that sound will only transmit based on the level that you set.
1
2
3 4
1) Press Menu/Select button to access
the main menu.
2) Select the VOX Sensitivity icon.
3) Use the up and down arrows to choose
the desired sensitivity level (1 to 4)
4) Press Menu/Select button to confirm.
E
N
9