Step 6 - Activating And Deactivating Additional Functions - Angelcare AC701 Owner's Manual

STEP 6 - ACTIVATING AND DEACTIVATING ADDITIONAL FUNCTIONS

MULTIFUNCTIONAL
The Angelcare monitor is multifunctional. It can be use in different combinations
®
according to your needs.
The Angelcare ® monitor can be used with the pre-program factory settings
or you can also customize your settings to your preference.
SOUND & MOVEMENT:
Allows you to detect the baby's
MOVEMENT & SOUND while using both
Parent Unit and Sensor Pad.
1
MOVEMENT ONLY:
Allows you to detect the baby's MOVEMENT ONLY
without the Parent Unit. This combination can be useful
when the baby is in the same room as the parents.
1
SOUND ONLY:
Allows you to detect the baby's SOUND ONLY without
the Sensor Pad. This combination can be useful if you
don't want to use the Sensor Pad or if your baby is older
than 24 months (maximum age to use the Sensor Pad).
1
NOTE:
To safely store just make sure to remove the Sensor Pad and cords
from the crib – disconnect sensor cord plug from the Nursery Unit
and safely store away in box for future use.
NOTE:
All changes and adjustments
made in the Settings mode
will not be activated unless
you confirm them by pressing
the Return icon. A long beep
will confirm your modification.
2
Slide the Nursery Unit Connecting
switch to 1 to detect sound
and movement.
2
Slide the Nursery Unit Connecting switch
to 2 to detect MOVEMENT ONLY. If the
Parent Unit is turned ON, the Parent Unit
will only display the Out-of-Range icon.
2
Slide the Nursery Unit Connecting switch to 1
to detect SOUND ONLY (Sensor Pad function
needs to be deactivated on the Parent Unit then
unplugged from the Nursery Unit).
IMPORTANT
When in Settings mode, the sound
transmission between the Parent
and the Nursery Unit will be
temporarily deactivated. ONLY the
Movement Alarm will remain active
(if function is already activated).
E E
N N
19