Thermostat; Fan Control - PSG -3000 Installation And Operating Instructions Manual

Thermodisk L-170

THERMOSTAT

The thermostat must be installed on an inside wall in a location where it is not likely to be affected by the draft
coming from an air outlet. It must be installed at a minimum of 55 inches above the floor.
N.B. The combined wood / electric model uses two thermostats and they should be installed at same height.

FAN CONTROL

The fan control setting may vary depending on the type of installation. The "out of service" temperature is factory
o
set at 110 F and the "in service" temperature is factory set at 150
for most installations.
OUTSIDE VIEW OF THE ELECTRIC ELEMENT
o
F. These settings should provide a proper operation
13
Red button
manual reset