Grundig GD-RN-CT8832N User Manual page 77

You can click the
2. To schedule an <All-day> recording, check the checkbox after the <All Day> item.
3. To arrange another schedule, set the <Start/End time> for each period.
Note:
Up to 8 periods can be configured for each day. And the time periods can't be overlapped each other.
4. Select the record type in the dropdown list.
Note:
‒
To enable <Motion>, <Alarm>, <M | A (motion or alarm) >, <M & A (motion and alarm)> and <VCA
(Video Content Analysis)> triggered recording and capture, you must configure the <Motion
Detection Settings>, <Alarm Input Settings> or the <VCA Settings> as well. For detailed information,
refer to Chapter 8.1 and Chapter 9.
‒
The <VCA Settings> are only available to the <Smart IP Cameras>.
Repeat the above <Edit Schedule> steps to schedule recording or capture for other days in the week. If
the schedule can also be applied to other days, click <Copy>.
Recording Schedule Interface
button to set the accurate time of the schedule.
Edit Schedule
77 ENGLISH