2. Click <OK> to save the settings and exit the Editing interface.
To edit advanced parameters:
Steps:
1.
Drag the horizontal scroll bar to the right side and click the
2.
You can edit the network information and the <Password> of the camera.
3.
Click <OK> to save the settings and to exit the interface.
Configuring the customized protocols:
To connect the network cameras which are not configured with the standard protocols,
you can configure the customized protocols for them.
Steps:
1.
Click the <Protocol> button in the Custom Adding IP camera interface to enter the Protocol
Management interface.
Network Configuration of the Camera
Password Configuration of the Camera
47 ENGLISH
icon.