3. Add the allocated <NetHDD>.
4. Select the <Type> between <NAS> and <IP SAN>.
5. Configure the <NAS> or the <IP SAN> settings.
Add NAS disk:
1) Enter the <NetHDD IP Address> in the text field.
2) Click the <Search> button to search the available <NAS> disks.
3) Select the <NAS> disk from the list shown below.
4) Or you can just manually enter the directory in the text field of <NetHDD Directory>.
5) Click the <OK> button to add the configured <NAS> disk.
Add IP SAN:
Enter the <NetHDD IP Address> in the text field.
1)
Click the <Search> button to search the available <IP SAN> disks.
2)
Select the <IP SAN> disk from the list shown below.
3)
Click the <OK> button to add the selected <IP SAN> disk.
4)
HDD Information Interface
Add NAS Disk
176 ENGLISH