Grundig GD-RN-CT8832N User Manual page 68

PTZ Panel - General
3. Click the <Call Pattern> button to call it.
4. Click the <Stop Pattern> button to stop calling it.
Customizing Linear Scan Limit:
The Linear Scan can be enabled to trigger the scan in the horizantal direction in the predefined range.
Note:
This function is supported by some models.
Steps:
1. Enter the <PTZ Control> interface: Menu > Camera > PTZ
PTZ Settings
2. Use the directional button to wheel the camera to the location where you want to set the limit and
click the <Left Limit> or <Right Limit> button to link the location to the corresponding limit.
Note:
The speed dome starts a linear scan from the left limit to the right limit and you must set the left limit on the
left side of the right limit; also the angle from the left limit to the right limit should be no more than 180º.
Calling Linear Scan:
68 ENGLISH