3.
When the device is activated, the system pops up the message box to remind you to remember
the password. Then you can click <Yes> to continue to export the GUID file for the future password
resetting.
4.
Insert the U-flash disk to your device, and export the GUID file to the U-flash disk in the <Reset
Password> interface. Please refer to the Chapter Resetting Your Password for the instructions of
password resetting.
Note:
Please keep your GUID file properly for future password resetting. This GUID Export function may not be
available for the GD-RN-AT819128N.
Using the Unlock Pattern for Login:
For the Admin User, you can configure the unlock pattern for the device login.
Configuring the Unlock Pattern:
Steps:
1. After the device is activated, you can enter the following interface to configure the device unlock
pattern.
Export GUID File Remind
Export GUID File
33 ENGLISH