Table of Contents
Advertisement
Steps:
2. Press and hold the <POWER> button on the front panel for 3 seconds.
3.
Enter the <Administrator's User Name> and <Password> in the dialog box for authentication.
4.
Click the <Yes> button.
Note:
Do not press the <POWER> button again when the system is shutting down.
Rebooting the NVR:
In the Shutdown menu, you can also reboot the NVR.
Steps:
1. Enter the <Shutdown> menu by clicking Menu > Shutdown.
2.
Click the <Logout> button to lock the NVR or the <Reboot> button to reboot the NVR.
Activating your Recorder:
For the first-time access, you need to activate the device by setting an Admin Password. No operation is
allowed before activation. You can also activate the device via a Web Browser, Grundig Viewer or the
SCMS Client Software.
Steps:
1. Enter the same password in the text field of <Create New Password> and <Confirm New Password>.
WARNING:
We highly recommend you create a strong password of your own choosing (Using a minimum of 8
characters, including at least three of the following categories: upper case letters, lower case letters,
numbers and special characters.) in order to increase the security of your product. We also recommend
that you reset your password regularly, especially in the high security system, resetting the password
monthly or weekly can better protect your product.
2.
Click <OK> to save the password and to activate the device.
Settings Admin Password
32 ENGLISH
Advertisement
Table of Contents
