Pos Configuration; Configuring The Pos Settings - Grundig GD-RN-CT8832N User Manual

9. POS Configuration

Note:
The <POS> feature is only supported by the NVR models GD-RN-AP8616P, GD-RN-AP8632P and GD-RN-
AT8864N.

9.1 Configuring the POS Settings

Steps:
1. Enter the <POS Settings> interface.
Menu > Configuration > POS> POS Settings
2. Select the <POS> from the drop-down list.
Note:
The amount of <POS> devices supported for each device is the half of its channel amount.
3. Check the checkbox to <Enable> the <POS> feature.
4. Select the <POS Protocol> to <Universal Protocol>, <EPSON>, <AVE> or <NUCLEUS>.
Note:
When the new protocol is selected, you should reboot the device to activate the new settings.
 <Universal Protocol>
Click the <Advanced> button to expand more settings when selecting the <Universal Protocol>. You
can set the <Start Line Tag>, <Line Break Tag> and the <End Line Tag> for the <POS Overlay
Characters> as well as the <Case-sensitive> property of the characters.
POS Settings
127 ENGLISH