Table of Contents
Advertisement
4.
Set up the <Arming Schedule> of the channel.
1) Select the <Arming Schedule> tab to set the <Arming Schedule> of <Handling Actions> for the
<Motion Detection>.
2) Choose one day of a week and up to eight time periods can be set within each day.
3) Click <Apply> to save the settings
Note:
Time periods shall not be repeated or overlapped.
5.
Click the <Handling> tab to set up <Alarm Response Actions> of the <Motion Alarm> (please
refer to Chapter 8.6 Setting Alarm Response Actions).
6.
If you want to set <Motion Detection> for another channel, repeat the above steps or just click
<Copy> in the <Motion Detection> interface to copy the above settings to it.
Set Trigger Camera of Motion Detection
Set Arming Schedule of Motion Detection
116 ENGLISH
Advertisement
Table of Contents
