Table of Contents
Advertisement
3.
After the time settings, click the <Next> button which takes you back to the Network Setup Wizard
window, as shown in the following Picture.
Note:
Two self-adaptive 10M/100M/1000M network interfaces provided for GD-RN-AT8864N, GD-RN-AP8616P
and GD-RN-AP8632P and two working modes are configurable: Multi-address and Network Fault
tolerance. Also one self-adaptive 10M/100M/1000M network interface is provided for GD-RN-AC2416N,
GD-RN-AC2416P, GD-RN-AP8616P and GD-RN-AP8632P.
4.
Click the <Next> button after you configured the basic network parameters. Then you will enter
the <Cloud P2P> interface. Configure the <Cloud P2P> according to your need.
5.
Click the <Next> button after you configured the basic network parameters. Then you will enter
the <Advanced Network Parameter> interface. You can enable <UPnP>, <DDNS> and set other
ports according to your need.
Network Settings
Advanced Network Parameters
39 ENGLISH
Advertisement
Table of Contents
