Grundig GD-RN-CT8832N User Manual page 123

3. Click to set the Type of Event to be displayed on the image.
4. Click the <OK> button to finish the settings.
<Full Screen Monitoring>:
When an <Alarm> is triggered, the local monitor (VGA, HDMI or BNC monitor) displays in full screen the
video image from the alarming channel configured for <Full Screen Monitoring>.
If alarms are triggered simultaneously in several channels, their full-screen images will be switched at
an interval of 10 seconds (default <Dwell Time>). A different <Dwell Time> can be set by going to Menu
>Configuration>Live View > Full Screen Monitoring <Dwell Time>.
<Auto-switch> will terminate once the alarm stops and you will be taken back to the <Live View>
interface.
Note:
During <Trigger Channel Settings> you must select the channel(s) where you want to make full screen
monitoring.
<Audible Warning>:
Trigger an audible beep when an alarm is detected.
<Notify Surveillance Center>:
This sends an <Exception> or an <Alarm> signal to the remote <Alarm Host> when an event occurs. The
<Alarm Host> refers to the PC installed with a <Remote Client>.
Event Hint Settings Interface:
Event Hint Settings Interface
123 ENGLISH