Grundig GD-RN-CT8832N User Manual page 52

Note:
‒
The <PoE> is enabled with the short network cable mode (<OFF>) by default.
‒
The bandwidth of the IP Camera connected to the <PoE> via a long network cable (100 - 300 meters)
cannot exceed 6 MP.
‒
The allowed max. long network cable may be less than 300 meters, depending on different IP
Camera models.
‒
When the transmission distance reaches 100 to 250 meters, it must use the CAT5E or CAT6 network
cable to connect with the <PoE> interface.
‒
When the transmission distance reaches 250 to 300 meters, it must use the CAT6 network cable to
connect with the <PoE> interface.
‒
Refer to chapter 19 for the list of IP cameras.
Note:
You can check the connecting status and power information of the <POE> channel on the interface.
6. Click <Back> to finish the settings.
52 ENGLISH