Grundig GD-RN-CT8832N User Manual page 57

Using an Auxiliary Monitor:
Certain features of the <Live View> are also available while in an Aux monitor. These features include:
<Single Screen>: Switch to a full screen display of the selected camera. Camera can be selected from a

dropdown list.
<Multi-screen>: Switch between different <Display Layout> options. Layout options can be selected

from a dropdown list.
<Next Screen>: When displaying less than the maximum number of cameras in the <Live View>, clicking

this feature will switch to the next set of displays.
<Playback>: Enter into the <Playback> mode.

<PTZ Control>: Enter the <PTZ Control> mode.

<Main Monitor>: Enter the <Main Operation> mode.

Note:
In the <Live View> mode of the main output monitor, the menu operation is not available while Aux output
mode is enabled.
Quick Setting Toolbar in the <Live View> mode:
On the screen of each channel, there is a <Quick Setting Toolbar> which displays when you single-click
the mouse in the corresponding screen.
Note:
The fisheye expansion view feature is supported by the models GD-RN-AP8616P, GD-RN-AP8632P, GD-RN-
AT8864N only.
Description of Quick Setting Toolbar Icons:
Icon Description
Enable/Disable
Manual Record
Capture
Image Settings
Information
Main/Sub-
Stream
<Instant Playback> only shows the record from the last five minutes. If no record is found, it
means there is no record during the last five minutes.
Quick Setting Toolbar
Icon Description
Instant
Playback
PTZ Control
Face Detection
Close
57 ENGLISH
Icon Description
Mute/Audio
on
Digital Zoom
Live
Strategy
3D Positioning
(only for some
NVR models)
View