Table of Contents
Advertisement
User Manual of Digital Video Recorder
2.3 Using the Wizard for Basic Configuration
By default, the Setup Wizard starts once the device has loaded.
Operating the Setup Wizard:
1. The Start Wizard can walk you through some important settings of the device. If you don't want to use the
Start Wizard at that moment, click Exit. You can also choose to use the Start Wizard next time by leaving
the "Start wizard when device starts?" checkbox checked.
2. Click Next to enter the date and time settings window.
3. After the time settings, click Next which takes you to the Network Start Wizard window.
Dual NIC is not supported by DS-7200HWI-SV series.
Figure 2. 4 Start Wizard Interface
Figure 2. 5 Date and Time Settings
33
Advertisement
Table of Contents
